Training Alignment Pump and Motor Training
Motor-Pump alignment is the process of aligning shaft centerlines between a motor and a pump. The motor is the prime mover, transferring power to the pump by the use of a coupling. This is probably the most common configuration of coupled machines in industry. In this type of alignment, the motor is almost always the moveable machine, and the pump is the stationary machine. In almost all cases, the pump is already piped up with suction and discharge flanges, which means it can move only slightly, if at all.
motor-pump-alignment. Proper shaft alignment is achieved by moving the motor. The motor is shimmed vertically to achieve the proper elevation to align it to the pump, both parallel (offset) and angular. The motor is them moved horizontally to achieve proper horizontal placement for aligning the shaft centerlines, both parallel and angular. The motor is moved horizontally by the use of jacking bolts, or by the use of pry bars, hammers, or other tools. Motors are normally easier to move, since the motor is not piped into a process system. A short run of flexible conduit is most often used to run the electrical wiring from a local disconnect, or a rigid conduit, to the motor termination box. This allows for ease of movement of the motor.
Materi Pelatihan Alignment Pump and Motor
- Fundamental Alignment
- Diagnosing Misalignment
- Measuring Misalignment
- Preparing Task Alignment
- Alignment Methods (praktis)
•Rough Methods
•Face and Rim - Alignment Tolerances
- Complicating Factor Alignment.
- Introduction to Laser Alignment
- Minimizes the forces of misalignment acting upon the bearings and seals of both components.
- Minimizes Wear of The Coupling.
- Reduce Energy Costs.
- Maximizes the life of the Machine Components by Minimizing Wear, ncreasing time between failures, and reducing vibration
Who Should Attend
Instrument Engineer atau Supervisor, Plant Maintenance atau Operators atau Supervisors
| Jadwal/ Agenda Pelatihan |
|---|
| - 8-10 Januari 2022 - 15-17 Februari 2022 - 22-24 Maret 2022 - 19-21 April 2022 - 10-12 Mei 2022 - 21-23 Juni 2022 - 19-21 Juli 2022 - 9-11 Agustus 2022 - 20-22 September 2022 - 18-20 Oktober 2022 - 8-10 November 2022 - 6-8 Desember 2022 - 27-29 Desember 2022 |
Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta
| Lokasi dan Investasi | Fasilitas |
|---|---|
| - Yogyakarta(6.500.000 IDR / participant) - Jakarta(6.500.000 IDR / participant) - Bandung (6.500.000 IDR / participant) - Bali (7.500.000 IDR / participant) - Surabaya (6.000.000 IDR / participant) - Malang (7.000.000 IDR / participant) - Batam (7.500.000 IDR / participant) - Lombok(7.500.000 IDR / participant) | - FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal) - FREE TransporsiPeserta ke tempat pelatihan . - Module atau Handout - FREE Flashdisk - Sertifikat - FREE Bag or bagpackers (Tas Training) - Training Kit (Dokumentasi photo, Blocknote, ATK, etc) - 2x Coffe Break & 1 Lunch, Dinner - FREE Souvenir Exclusive - Training room full AC and Multimedia |
Catatan : Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.
Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama dan dapatkan private class untuk kebutuhan pelatihan yang exclusive.
Informasi lebih lanjut bisa menghubungi kami di 0813 9174 4475 / informasi.diklatindonesia@gmail.com
