TRAINING DRILLING AND WELL CONSTRUCTION
Drilling and well construction (probably one of the most expensive features of a geothermal direct use project) is often the least understood. This training will provides the basics of Equipment and methods used for drilling and completion of geothermal wells. It provides data needed by architects, engineers, and consultants to assist them in specification writing, selection of contractors, and drilling and completion inspection. Most direct use geothermal wells can be drilled using conventional water well technology and equipment. Most of the wells will produce water at temperatures less than boiling and without artesian flow at the surface; however, some will be hotter or will flow. Blowout preventers and other sophisticated safety equipment are not usually required; however, this does not mean that there are not significant Safety considerations that should be addressed. Many of the wells have water above 140 0 F and this will scald. Public and drilling crew safety must be ensured. The cementing portion may appear to be overly detailed and long.
However, the author’s view is that, all too often, Cementing is considered simply as a means of plugging up the annulus between the casing and borehole wall. Little attention is paid to methods and materials, and a poor cement job is the result. This can result in lost production zones, cold water leaking into production zones, geothermal water leaking into freshwater zones, and reduced useful well life. Also, in view of the increasing awareness and concern about inter-zonal Migration and possible fresh water aquifer contamination, proper cementing is of increasing importance.
Materi pelatihan drilling and well construction
Drilling Equipment
Cable Tool
Rotary Drilling
Other Thypes of rotator drilling
Downhole harmer
Reverse circulation
Drill through casing driver
Dual tube reverse circulation
4.Core Drilling
5. Directional Drilling
Drilling Fluids
Long Circulation
Drilling Muds
Density
Viscosity
Sand content
Filter cake
Gelling
Lost circulation materials
Recognizing geothermal zones
3. Polymer fluids
4. Air based Fluids
5. Plumbness and Alignment
Well Design
Casing Materials
Grouting and Cementing
Blow out Prevention Equipment
Injection wells
Well Specifications
BID sheets
Well Costs
PARTICIPANTS KURSUS DRILLING AND WELL CONSTRUCTION
Senior operational and engineering personnel involved in drilling atau workover operations; OIMs, Drilling Superintendents, Drilling Engineers, Drilling Supervisors.
| Jadwal/ Agenda Pelatihan |
|---|
| - 14-16 Januari 2025 - 4-6 Februari 2025 - 18-19 Maret 2025 - 22-24 April 2025 - 6-8 Mei 2025 - 17-19 Juni 2025 - 8-10 Juli & 29-31 JuIi 2025 - 26-28 Agustis 2025 - 16-18 September 2025 - 7-9 Oktober 2025 - 11-12 November 2025 - 2-4 Desember & 16-18 Desember 2025 |
Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta
| Lokasi dan Investasi | Fasilitas |
|---|---|
| - Yogyakarta(6.500.000 IDR / participant) - Jakarta(6.500.000 IDR / participant) - Bandung (6.500.000 IDR / participant) - Bali (7.500.000 IDR / participant) - Surabaya (6.000.000 IDR / participant) - Malang (7.000.000 IDR / participant) - Batam (7.500.000 IDR / participant) - Lombok(7.500.000 IDR / participant) | - FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal) - FREE TransporsiPeserta ke tempat pelatihan . - Module atau Handout - FREE Flashdisk - Sertifikat - FREE Bag or bagpackers (Tas Training) - Training Kit (Dokumentasi photo, Blocknote, ATK, etc) - 2x Coffe Break & 1 Lunch, Dinner - FREE Souvenir Exclusive - Training room full AC and Multimedia |
Catatan : Hotel untuk pelatihan ada beberapa pilihan seperti Hotel Ibis, Hotel Aston, Hotel Amaris, Hotel Cavinton, Hotel Hyatt, Hotel Grand Aston, Novotel, Hotel Harris, Hotel 101, Hotel Grand Mercure,Ritz Carlton, Hotel Ibis Style dan masih banyak pilihan menarik lainnya.
Apabila perusahaan membutuhkan paket in house training anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan. Dapatkan harga spesial untuk pengiriman minimal 3 peserta dari perusahaan yang sama dan dapatkan private class untuk kebutuhan pelatihan yang exclusive.
Informasi lebih lanjut bisa menghubungi kami di 0813 9174 4475 / informasi.diklatindonesia@gmail.com
